HP E4510-48G Command Reference Manual page 876

Rcv 0 0
Secondary port: GigabitEthernet1/0/4
Packet Link
Direct Hello Down
------------------------------------------------------------------------------
Send 0 0
Rcv 16878 0
Ring ID : 2
Ring Level : 1
Node Mode : Edge
Active Status : No
Common port : GigabitEthernet1/0/3
Packet Link
Direct Hello Down
------------------------------------------------------------------------------
Send 0 0
Rcv 0 0
Common port : GigabitEthernet1/0/4
Packet Link
Direct Hello Down
------------------------------------------------------------------------------
Send 0 0
Rcv 0 0
Edge port : GigabitEthernet1/0/5
Packet Link
Direct Hello Down
------------------------------------------------------------------------------
Send 0 0
Rcv 0 0
Table 3-3 display rrpp statistics command output description
Field
Ring ID
Ring Level
Node Mode
Active Status
Primary Port
0 0 0
Common Complete
Flush FDB Flush FDB Hello
0 0 0
0 1 0
Common Complete
Flush FDB Flush FDB Hello
0 0 0
0 0 0
Common Complete
Flush FDB Flush FDB Hello
0 0 0
0 0 0
Common Complete
Flush FDB Flush FDB Hello
0 0 0
0 0 0
RRPP ring ID
RRPP ring level:
0 for primary ring
1 for subring
Node mode:
Master node
Transit node
Edge node
Assistant edge node
RRPP ring activation status:
Yes for active
No for inactive
The primary port field means the node mode is master node or
transit node. "-" appears when the port is not configured on the ring
or the board to which the port belongs does not start, and in this
case, no corresponding statistics appears.
3-6
0 0
Edge Major Packet
Fault Total
0 0
0 16879
Edge Major Packet
Fault Total
0 0
0 0
Edge Major Packet
Fault Total
0 0
0 0
Edge Major Packet
Fault Total
0 0
0 0
Description