Tcp Timer Syn-Timeout - HP E4510-48G Command Reference Manual

Default Level
2: System level
Parameters
time-value: Length of the TCP finwait timer in seconds, in the range 76 to 3,600.
Description
Use the tcp timer fin-timeout command to configure the length of the TCP finwait timer.
Use the undo tcp timer fin-timeout command to restore the default.
By default, the length of the TCP finwait timer is 675 seconds.
Note that the actual length of the finwait timer is determined by the following formula:
Actual length of the finwait timer = (Configured length of the finwait timer – 75) + configured length of
the synwait timer
Related commands: tcp timer syn-timeout, tcp window.
Examples
# Set the length of the TCP finwait timer to 800 seconds.
<Sysname> system-view
[Sysname] tcp timer fin-timeout 800

tcp timer syn-timeout

Syntax
tcp timer syn-timeout time-value
undo tcp timer syn-timeout
View
System view
Default Level
2: System level
Parameters
time-value: TCP finwait timer in seconds, in the range 2 to 600.
Description
Use the tcp timer syn-timeout command to configure the length of the TCP synwait timer.
Use the undo tcp timer syn-timeout command to restore the default.
By default, the value of the TCP synwait timer is 75 seconds.
Related commands: tcp timer fin-timeout, tcp window.
Examples
# Set the length of the TCP synwait timer to 80 seconds.
<Sysname> system-view
10-19