Display Telnet Client Configuration - HP E4510-48G Command Reference Manual

Default Level
2: System level
Parameters
5: Five data bits.
6: Six data bits.
7: Seven data bits.
8: Eight data bits.
Description
Use the databits command to set the databits for the user interface.
Use the undo databits command to revert to the default data bits.
The default data bits is 8.
3COM switch 4510G only support data bits 7 and 8. To establish the connection again, you need to
modify the configuration of the termination emulation utility running on your PC accordingly.
Examples
# Set the data bits to 7.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] databits 7

display telnet client configuration

Syntax
display telnet client configuration
View
Any view
Default Level
1: Monitor level
Parameter
None
1-6