Mac-Address Information Enable (System View); Mac-Address Information Interval - HP E4510-48G Command Reference Manual

[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-address information enable added

mac-address information enable (system view)

Syntax
mac-address information enable
undo mac-address information enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the mac-address information enable command to enable MAC Information globally.
Use the undo mac-address information enable command to disable MAC Information globally.
By default, MAC Information is disabled globally.
Examples
# Enable MAC Information globally.
<Sysname> system-view
[Sysname] mac-address information enable

mac-address information interval

Syntax
mac-address information interval value
undo mac-address information interval
View
System view
Default Level
2: System level
Parameters
value: Interval for sending Syslog or Trap messages (in seconds). The range for this argument is 1 to
20000.
14-2