Examples
# Take the current topology as the standard topology.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] topology accept all
topology restore-from
Syntax
topology restore-from { ftp-server | local-flash }
View
Cluster view
Default Level
2: System level
Parameters
ftp-server: Restores the standard topology information from the FTP server.
local-flash: Restores the standard topology information from the local flash.
Description
Use the topology restore-from command to restore the standard topology information from the FTP
server or the local flash in case the cluster topology information is incorrect.
Note that:
This command can be executed on the management device only.
If the stored standard topology is not correct, the device cannot be aware of if. Therefore, you
must ensure that the standard topology is correct.
Examples
# Restore the standard topology.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] topology restore-from local-flash
topology save-to
Syntax
topology save-to { ftp-server | local-flash }
View
Cluster view
20-47