Member
Role
Status
monitor-link group
Syntax
monitor-link group group-id
undo monitor-link group group-id
View
System view
Default Level
2: System level
Parameters
group-id: Monitor link group ID, in the range 1 to 16.
Description
Use the monitor-link group command to create a monitor link group and enter monitor link group view.
If the specified monitor link group already exists, you enter monitor link group view directly.
Use the undo monitor-link group command to remove a monitor link group.
Related commands: port monitor-link group, port.
Examples
# Create monitor link group 1.
<Sysname> system-view
[Sysname] monitor-link group 1
[Sysname-mtlk-group1]
port
Syntax
port interface-type interface-number { uplink | downlink }
undo port interface-type interface-number
View
Monitor link group view
Field
Description
Member ports of the monitor link group
Port role, which can be uplink or downlink
Member link state, which can be up or down
2-2