HP E4510-48G Command Reference Manual page 362

MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
InReceives:
InTooShorts:
InTruncatedPkts:
InHopLimitExceeds:
InBadHeaders:
InBadOptions:
ReasmReqds:
ReasmOKs:
InFragDrops:
InFragTimeouts:
OutFragFails:
InUnknownProtos:
InDelivers:
OutRequests:
OutForwDatagrams:
InNoRoutes:
InTooBigErrors:
OutFragOKs:
OutFragCreates:
InMcastPkts:
InMcastNotMembers:
OutMcastPkts:
InAddrErrors:
InDiscards:
OutDiscards:
Table 12-5 display ipv6 interface verbose command output description (on a switch)
Field
Vlan-interface2 current state
Line protocol current state
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Physical state of the interface:
Administratively DOWN: Indicates that the VLAN interface is
administratively down; that is, the interface is shut down
using the shutdown command.
DOWN: Indicates that the VLAN interface is administratively
up but its physical state is down; that is, no ports in the VLAN
are up, which may be caused by a connection or link failure.
UP: Indicates that the administrative and physical states of
the VLAN interface are both up.
Link layer protocol state of the interface:
DOWN: Indicates that the link layer protocol state of the
VLAN interface is down, generally because no IP address is
configured.
UP: Indicates that the link layer protocol state of the VLAN
interface is up.
12-6
Description