Acl Ipv6 Name; Description (For Ipv6) - HP E4510-48G Command Reference Manual

Description
Use the acl ipv6 copy command to create an IPv6 ACL by copying an existing IPv6 ACL. The new
ACL is of the same ACL type and has the same match order, rules, rule numbering step and
descriptions.
Note that:
The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
The new ACL does not take the name of the source IPv6 ACL.
Examples
# Copy ACL 2008 to generate ACL 2009.
<Sysname> system-view
[Sysname] acl ipv6 copy 2008 to 2009

acl ipv6 name

Syntax
acl ipv6 name acl6-name
View
System view
Default Level
2: System level
Parameters
acl6-name: Name of the IPv6 ACL, a case insensitive string of 1 to 32 characters. It must start with an
English letter and cannot be the English word of all to avoid confusion.
Description
Use the acl ipv6 name command to enter the view of an existing IPv6 ACL by specifying its name.
Examples
# Enter the view of the IPv6 ACL named flow.
<Sysname> system-view
[Sysname] acl ipv6 name flow
[Sysname-acl6-basic-2002-flow]

description (for IPv6)

Syntax
description text
undo description
View
Basic IPv6 ACL view, advanced IPv6 ACL view
14-22