Dot1X Max-User - HP E4510-48G Command Reference Manual

Description
Use the dot1x mandatory-domain command to specify the mandatory authentication domain for
users accessing the port.
Use the undo dot1x mandatory-domain command to remove the mandatory authentication domain.
By default, no mandatory authentication domain is specified.
Note that:
When authenticating an 802.1X user trying to access the port, the system selects an
authentication domain in the following order: the mandatory domain, the ISP domain specified in
the username, and the default ISP domain.
The specified mandatory authentication domain must exist.
On a port configured with a mandatory authentication domain, the user domain name displayed by
the display connection command is the name of the mandatory authentication domain. For
detailed information about the display connection command, refer to AAA Commands in the
Security Volume.
Related commands: display dot1x.
Examples
# Configure the mandatory authentication domain my-domain for 802.1X users on GigabitEthernet
1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x mandatory-domain my-domain
# After 802.1X user usera passes the authentication, display the user connection information on
GigabitEthernet 1/0/1.
[Sysname-GigabitEthernet1/0/1] display connection interface GigabitEthernet 1/0/1
Index=68 ,Username=usera@my-domian
MAC=0015-e9a6-7cfe
Total 1 connection(s) matched.

dot1x max-user

Syntax
In system view:
dot1x max-user user-number [ interface interface-list ]
undo dot1x max-user [ interface interface-list ]
In Ethernet interface view:
dot1x max-user user-number
undo dot1x max-user
View
System view, Ethernet interface view
,IP=3.3.3.3
4-9