HP E4510-48G Command Reference Manual page 1107

View
System view
Default Level
3: Manage level
Parameters
policy-name: Name of an SSL server policy, a string of 1 to 16 characters.
Description
Use the ip https ssl-server-policy command to associate the HTTPS service with an SSL server-end
policy.
Use the undo ip https ssl-server-policy to remove the association between the HTTPS service and
an SSL server-end policy.
By default, the HTTPS service is not associated with any SSL server-end policy.
Note that:
The HTTPS service can be enabled only after this command is configured successfully.
You cannot modify an SSL server-end policy or remove the association between the HTTPS
service and an SSL server-end policy after the HTTS service is enabled.
Related commands: ssl server-policy in SSL Commands in the Security Volume
Examples
# Configure the HTTPS service to use SSL server-end policy myssl.
<Sysname> system-view
[Sysname] ip https ssl-server-policy myssl
9-5