Ssh Server Rekey-Interval - HP E4510-48G Command Reference Manual

Parameters
None
Description
Use the ssh server enable command to enable SSH server.
Use the undo ssh server enable command to disable SSH server.
By default, SSH server is disabled.
Examples
# Enable SSH server.
<Sysname> system-view
[Sysname] ssh server enable

ssh server rekey-interval

Syntax
ssh server rekey-interval hours
undo ssh server rekey-interval
View
System view
Default Level
2: System level
Parameters
hours: Server key pair update interval in hours, in the range 1 to 24.
Description
Use the ssh server rekey-interval command to set the interval for updating the RSA server key.
Use the undo ssh server rekey-interval command to remove the configuration.
By default, the update interval of the RSA server key is 0, that is, the RSA server key is not updated.
Related commands: display ssh server.
This command is only available to SSH users using SSH1 client software.
The system does not update any DSA key pair periodically.
Examples
# Set the RSA server key pair update interval to 3 hours.
<Sysname> system-view
10-6