Ssh2.0 Client Configuration Commands; Display Ssh Client Source - HP E4510-48G Command Reference Manual

Authentication method and public key configuration takes effect only for users logging in after the
configuration.
If an SFTP user has been assigned a public key, it is necessary to set a working folder for the
user.
The working folder of an SFTP user is subject to the user authentication method. For a user using
only password authentication, the working folder is the AAA authorized one. For a user using only
publickey authentication or using both the publickey and password authentication methods, the
working folder is the one set by using the ssh user command.
Related commands: display ssh user-information.
Examples
# Create an SSH user named user1, setting the service type as sftp, the authentication method as
publickey, the work folder of the SFTP server as flash, and assigning a public key named key1 to the
user.
<Sysname> system-view
[Sysname] ssh user user1 service-type sftp authentication-type publickey assign publickey
key1 work-directory flash:

SSH2.0 Client Configuration Commands

display ssh client source

Syntax
display ssh client source
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ssh client source command to display the source IP address or source interface
currently set for the SSH client.
If neither source IP address nor source interface is specified for the SSH client, the system will prompt
you to specify the source information.
Related commands: ssh client source.
Examples
# Display the source IP address of the SSH client.
<Sysname> display ssh client source
The source IP address you specified is 192.168.0.1
10-8