Table of Contents
Advertisement
Parameters
ipv6-address1/ipv6-address2: An IPv6 address range from IPv6 address1 to IPv6 address2.
prefix-length1/prefix-length2: Prefix length, in the range 0 to 128.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only
brief active routing information is displayed.
Description
Use the display ipv6 routing-table ipv6-address1 ipv6-address2 command to display routes with
destinations falling into the specified IPv6 address range.
Examples
# Display routes with destinations falling into the IPv6 address range.
<Sysname> display ipv6 routing-table 100:: 64 300:: 64
Routing Table :
Summary Count : 3
Destination: 100::/64
NextHop
: ::
Interface : NULL0
Destination: 200::/64
NextHop
: ::
Interface : NULL0
Destination: 300::/64
NextHop
: ::
Interface : NULL0
Refer to
Table 1-4
display ipv6 routing-table ipv6-prefix
Syntax
display ipv6 routing-table ipv6-prefix ipv6-prefix-name [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-prefix-name: Name of the IPv6 prefix list, in the range 1 to 19 characters.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only
brief active routing information is displayed.
for description about the above output.
Protocol : Static
Preference: 60
Cost
: 0
Protocol : Static
Preference: 60
Cost
: 0
Protocol : Static
Preference: 60
Cost
: 0
1-16
Advertisement
Chapters
Table of Contents
