HP E4510-48G Command Reference Manual page 1220

Parameters
admin-name operation-tag: Displays statistics of the specified test group. If this argument is not
specified, statistics of all test groups are displayed. admin-name represents the name of the
administrator who creates the NQA operation. It is a string of 1 to 32 characters, case-insensitive.
operation-tag represents the test operation tag. It is a string of 1 to 32 characters, case-insensitive.
Description
Use the display nqa statistics command to display statistics of NQA test or tests.
After the test operation begins, if not all the probes in the first test have been finished, statistics cannot
be generated. In this case, if you display the statistics using this command, the statistics is displayed
as all 0s.
Examples
# Display statistics of UDP jitter tests.
<Sysname> display nqa statistics admin test
NQA entry(admin admin, tag test) test statistics:
NO. : 1
Destination IP address: 192.168.1.42
Start time: 2008-05-29 11:33:29.9
Life time: 8
Send operation times: 70
Min/Max/Average round trip time: 1/63/19
Square-Sum of round trip time: 36330
Extended results:
Packet lost in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
UDP-jitter results:
RTT number: 70
Min positive SD: 1
Max positive SD: 24
Positive SD number: 34
Positive SD sum: 415
Positive SD average: 12
Positive SD square sum: 6593
Min negative SD: 1
Max negative SD: 40
Negative SD number: 28
Negative SD sum: 28
Negative SD average: 13
Negative SD square sum: 7814
One way results:
Receive response times: 70
Min positive DS: 1
Max positive DS: 22
Positive DS number: 27
Positive DS sum: 362
Positive DS average: 13
Positive DS square sum: 6450
Min negative DS: 1
Max negative DS: 64
Negative DS number: 35
Negative DS sum: 35
Negative DS average: 12
Negative DS square sum: 420
18-12