Speed; Stopbits - HP E4510-48G Command Reference Manual

% Disable ui-vty0-4 , are you sure ? [Y/N]y

speed

Syntax
speed speed-value
undo speed
View
AUX interface view
Default Level
2: System level
Parameters
speed-value: Transmission speed (in bps). This argument can be 300, 600, 1200, 2400, 4800, 9600,
19,200, 38,400, 57,600, 115,200 and defaults to 19,200.
Description
Use the speed command to set the transmission speed of the user interface.
Use the undo speed command to revert to the default transmission speed.
After you use the speed command to configure the transmission speed of the AUX user interface, you
must change the corresponding configuration of the terminal emulation program running on the PC, to
keep the configuration consistent with that on the switch.
Examples
# Set the transmission speed of the AUX user interface to 9600 bps.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 9600

stopbits

Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
View
AUX interface view
1-20