Acl Name - HP E4510-48G Command Reference Manual

View
System view
Default Level
2: System level
Parameters
source-acl-number: Number of an existing IPv4 ACL, which must be in the following ranges:
2000 to 2999 for basic IPv4 ACLs
3000 to 3999 for advanced IPv4 ACLs
4000 to 4999 for Ethernet frame header ACLs
name source-acl-name: Name of an existing IPv4 ACL, a case insensitive string of 1 to 32 characters.
It must start with an English letter and cannot be the English word of all to avoid confusion.
dest-acl-number: Number of a non-existent IPv4 ACL, which must be of the same ACL type as the
source ACL and in the following ranges:
2000 to 2999 for basic IPv4 ACLs
3000 to 3999 for advanced IPv4 ACLs
4000 to 4999 for Ethernet frame header ACLs
name dest-acl-name: Name of a non-existent IPv4 ACL, a case insensitive string of 1 to 32 characters.
It must start with an English letter and cannot be the English word of all to avoid confusion. The system
will automatically assign the new ACL a number which is the smallest among the available numbers of
the same ACL type.
Description
Use the acl copy command to create an IPv4 ACL by copying an existing IPv4 ACL. The new ACL is
of the same ACL type and has the same match order, rules, rule numbering step and descriptions.
Note that:
The source IPv4 ACL and the destination IPv4 ACL must be of the same type.
The new ACL does not take the name of the source IPv4 ACL.
Examples
# Copy ACL 2008 to generate ACL 2009.
<Sysname> system-view
[Sysname] acl copy 2008 to 2009

acl name

Syntax
acl name acl-name
View
System view
Default Level
2: System level
14-7