HP E4510-48G Command Reference Manual page 1117

Group name: mygroupv3
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
User name: userv3code
Group name: groupv3code
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
Table 10-6 display snmp-agent usm-user command output description
User name
Group name
Engine ID
Storage-type
UserStatus
enable snmp trap updown
Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the enable snmp trap updown command to enable the trap function for interface state changes.
Use the undo enable snmp trap updown command to disable the trap function for interface state
changes.
By default, the trap function for interface state changes is enabled.
Field
SNMP user name
SNMP group name
Engine ID for an SNMP entity
Storage type, which can be the following:
See
SNMP user status
Description
volatile
nonvolatile
permanent
readOnly
other
Table 10-1 for details.
10-10