Field
State
display udp statistics
Syntax
display udp statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display udp statistics command to display statistics of UDP packets.
Related commands: reset udp statistics.
Examples
# Display statistics of UDP packets.
<Sysname> display udp statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
Table 10-7 display udp statistics command output description
Received
Total
packets:
checksum error
shorter than header
data length larger than packet
unicast(no socket on port)
State of the TCP connection
Field
Description
Total number of UDP packets received
Total number of packets with incorrect checksum
Number of packets with data shorter than head
Number of packets with data longer than packet
Number of unicast packets with no socket on port
10-13
Description