Display Cfd Mp - HP E4510-48G Command Reference Manual

Field
One or more streams of
cross-connect CCMs is
received. The last-received
CCM:
Some other MEPs are
transmitting the RDI bit.

display cfd mp

Syntax
display cfd mp [ interface interface-type interface-number ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display cfd mp command to display the MP information.
Note that:
If no port is specified, this command displays the MP information on all ports.
The information displayed is sorted by port name primarily in the ascending VLAN ID order within
the same port, and in the order of outward-facing MEPs (from low to high level), MIPs, and
inward-facing MEPs (from high to low level) within the same VLAN.
Examples
# Display the MP information on all ports.
<Sysname> display cfd mp
Interface GigabitEthernet1/0/1
MEP ID: 100
Maintenance domain: mdtest0
Maintenance association: mainmd0
MEP ID: 105
Maintenance domain: mdtest5
Maintenance association: mainmd5
MIP
Maintenance domain: mdtest6
Maintenance association: mainmd6
Cross-connect CCMs are received, and the content of the last
cross-connect CCM is displayed. (This information is displayed only
when cross-connect CCM(s) is/are received.)
CCMs with RDI bits misplaced are received from other MEPs. (This
information is displayed only when this type of CCM(s) is/are
received.)
VLAN 100
Level: 0 Service instance: 100
Level: 5 Service instance: 105
Level: 6 Service instance: 106
Description
Direction: Outbound
Direction: Outbound
6-19