Ip Forward-Broadcast (Interface View) - HP E4510-48G Command Reference Manual

broadcast/multicast(no socket
on port)
not delivered, input socket full
input packets missing pcb
cache
Sent
Total
packets:

ip forward-broadcast (interface view)

Syntax
ip forward-broadcast [ acl acl-number ]
undo ip forward-broadcast
View
Interface view
Default Level
2: System level
Parameters
acl acl-number: Access control list number, in the range 2000 to 3999. From 2000 to 2999 are
numbers for basic ACLs, and from 3000 to 3999 are numbers for advanced ACLs. Only directed
broadcasts permitted by the ACL can be forwarded.
Description
Use the ip forward-broadcast command to enable the interface to forward directed broadcasts to a
directly-connected network.
Use the undo ip forward-broadcast command to disable the interface from forwarding directed
broadcasts to a directly-connected network.
By default, an interface is disabled from forwarding directed broadcasts to a directly-connected
network.
Examples
# Enable VLAN-interface 2 to forward the directed broadcasts to a directly-connected network
matching ACL 2001.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ip forward-broadcast acl 2001
Field
Number of broadcast/multicast packets without
socket on port
Number of packets not delivered to an upper layer
due to a full socket cache
Number of packets without matching protocol
control block (PCB) cache
Total number of UDP packets sent
10-14
Description