Statistics Max-Group - HP E4510-48G Command Reference Manual

View
DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default Levels
2: System level
Parameters
hold-time: Hold time of a statistics group in minutes, in the range 1 to 1440.
Description
Use the statistics hold-time command to configure the hold time of a statistics group.
Use the undo statistics hold-time command to restore the default.
By default, the hold time of a statistics group is 120 minutes.
A statistics group has the aging mechanism. A statistics group will be deleted after it is kept for a period
of time so that information of a new statistics group will be recorded.
Note that this command is supported on all types of tests except DHCP tests.
Examples
# Configure the hold time of a statistics group as 3 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3

statistics max-group

Syntax
statistics max-group number
undo statistics max-group
View
DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default Levels
2: System level
Parameters
number: Maximum number of statistics groups that can be kept, in the range 0 to 100.
Description
Use the statistics max-group command to configure the maximum number of statistics groups that
can be kept.
Use the undo statistics max-group command to restore the default.
By default, the maximum number of statistics groups that can be kept is 2.
18-33