Dns Server Ipv6 - HP E4510-48G Command Reference Manual

Table 12-13 display udp ipv6 statistics command output description
Total
checksum error
shorter than header
data length larger than packet
unicast(no socket on port)
broadcast/multicast(no socket on port)
not delivered, input socket full
input packet missing pcb cache

dns server ipv6

Syntax
dns server ipv6 ipv6-address [ interface-type interface-number ]
undo dns server ipv6 ipv6-address [ interface-type interface-number ]
View
System view
Default Level
2: System level
Parameters
ipv6-address: IPv6 address of a DNS server.
interface-type interface-number: Specifies an interface. When the IPv6 address of the DNS server is a
link-local address, this argument must be specified.
Description
Use the dns server ipv6 command to specify a DNS server.
Use the undo dns server ipv6 command to remove the specified DNS server.
By default, no DNS server is configured.
Examples
# Specify a DNS server at 2002::1.
<Sysname> system-view
[Sysname] dns server ipv6 2002::1
Field Description
Total number of received/sent packets
Total number of packets with a checksum error
Total number of IPv6 UDP packets whose total length is
less than that specified by the packet header
Total number of packets whose data length exceeds that
specified by the packet header
Total number of received unicast packets without any
socket
Total number of received broadcast/multicast packets
without any socket
Number of packets not handled because of the receive
buffer being full
Number of packets failing to match the protocol control
block (PCB) cache
12-22