Dot1X Re-Authenticate; Dot1X Retry - HP E4510-48G Command Reference Manual

dot1x re-authenticate

Syntax
dot1x re-authenticate
undo dot1x re-authenticate
View
Ethernet interface view
Default Level
2: System level
Parameters
None
Description
Use the dot1x re-authenticate command to enable the periodic re-authentication function.
Use the undo dot1x re-authenticate command to restore the default.
By default, this function is disabled.
After periodic re-authentication is enabled on a port, the device will perform 802.1X authentication for
online users on the port at the interval specified by the periodic re-authentication timer (which is
configured by the dot1x timer reauth-period command). This is intended to track the connection
status of online users and update the authorization attributes assigned by the server, such as the ACL,
VLAN, and QoS Profile, ensuring that the users are in normal online state.
Related commands: dot1x timer reauth-period.
Examples
# Enable the 802.1X re-authentication function on GigabitEthernet1/0/1 and configure the periodic
re-authentication interval as 1800 seconds.
<Sysname> system-view
[Sysname] dot1x timer reauth-period 1800
[Sysname] interface gigabitethernet 1/0/1
[Sysname-Gigabitethernet1/0/1] dot1x re-authenticate

dot1x retry

Syntax
dot1x retry max-retry-value
undo dot1x retry
View
System view
Default Level
2: System level
4-14