Display Cluster Base-Topology - HP E4510-48G Command Reference Manual

IP-Pool
cluster-mac
Administrator device IP address
Administrator device mac address
Administrator status

display cluster base-topology

Syntax
display cluster base-topology [ mac-address mac-address | member-id member-number ]
View
Any view
Default Level
2: System level
Parameters
mac-address: Specifies a device by its MAC address. The system will display the standard topology
with the device as the root.
member-number: Specifies a device by its number. The system will display the standard topology with
the device as the root.
Description
Use the display cluster topology command to display the standard topology of a cluster.
You can create a standard topology map when executing the build or auto-build command, or you
can use the topology accept command to save the current topology map as the standard topology
map.
Note that this command can be executed on the management device only.
Examples
# Display the standard topology of a cluster.
<aaa_0.Sysname> display cluster base-topology
--------------------------------------------------------------------
(PeerPort) ConnectFlag (NativePort) [SysName:DeviceMac]
--------------------------------------------------------------------
[aaa_0.Sysname:000f-e200-1400]
|
├-(P_4/1)<-->(P_1/7)[Sysname:000f-e200-3333]
| |
| ├-(P_1/7)<-->(P_4/1)[aaa_3.Sysname:000f-e200-0000]
| | |
| | ├-(P_4/1)<-->(P_4/1)[aaa_0.Sysname:000f-e200-1400]
Field
Private IP addresses of the member devices in the cluster
Multicast MAC address of cluster management packets
IP address of the management device
MAC address of the management device
State of the management device
Description
20-30