Sflow Agent Ip - HP E4510-48G Command Reference Manual

Field
sFlow Global Information
Agent
Collector
Interval(s)
sFlow Port Information
Interface
Direction
Rate
Mode
Status

sflow agent ip

Syntax
sflow agent ip ip-address
undo sflow agent ip
View
System view
Default Level
2: System level
Parameters
ip-address: IP address of the sFlow agent.
Description
Use the sflow agent ip command to configure the IP address of the sFlow agent.
Use the undo sflow agent ip command to remove the configured IP address.
By default, no IP address is configured for the sFlow agent.
Note that:
The sFlow agent and sFlow collector must not have the same IP address.
Currently, a device supports only one sFlow agent.
sFlow global configuration information
IP address of the sFlow agent
IP address and port number of each sFlow collector
Counter sampling interval (sFlow interval)
Information of the ports enabled with sFlow
sFlow enabled interface
Packet sampling direction:
In: Samples inbound packets.
Out: Samples outbound packets.
In/Out: Samples inbound and outbound packets.
Packet sampling rate
Packet sampling mode:
Determine: Samples a fixed number of packets.
Random: Samples a random number of packets.
Status of the sFlow enabled port:
Suspend: Indicates the port is suspended, and it stops
sampling.
Active: Indicates the port is active and performs sampling.
13-2
Description