Sflow Configuration Commands; Display Sflow - HP E4510-48G Command Reference Manual

13

sFlow Configuration Commands

sFlow Configuration Commands

display sflow

Syntax
display sflow [slot slot-number ]
View
Any view
Default Level
2: System level
Parameters
slot slot-number: Displays the sFlow configuration information of the specified IRF member device.
The slot-number argument is the member number of the device in the IRF, which you can display with
the display irf command. The value range for the slot-number argument depends on the number of
members and numbering conditions in the current IRF. If no IRF exists, the slot-number argument is
the current device number.
Description
Use the display sflow command to display the sFlow configuration information.
Examples
# Display the sFlow configuration information of member device 1 in an IRF stack.
<Sysname> display sflow slot 1
sFlow Version: 5
sFlow Global Information:
Agent IP:10.10.10.1
Collector IP:10.10.10.2 Port:6343
Interval(s): 20
sFlow Port Information:
Interface
GigabitEthernet1/0/1
Table 13-1 display sflow command output description
Field
sFlow Version
Direction Rate
Out 5000
Currently, sFlow has the following versions:
4: sFlow version 4.
5: sFlow version 5.
13-1
Mode Status
Random Active
Description