Ftp Update - HP E4510-48G Command Reference Manual

View
System view
Default Level
3: Manage level
Parameters
minute: Idle-timeout timer in minutes, in the range 1 to 35791.
Description
Use the ftp timeout command to set the idle-timeout timer.
Use the undo ftp timeout command to restore the default.
By default, the FTP idle time is 30 minutes.
After you log in to an FTP server, if the connection is disrupted and the FTP server is not notified, the
system will maintain the connection, which will cause the occupation of the system resources and
affect the login of other FTP users. To address this problem, you can set an idle-timeout timer so that
the FTP server can disconnect from the user if no information is received or/and transmitted before the
timer expires.
Examples
# Set the idle-timeout timer to 36 minutes.
<Sysname> system-view
[Sysname] ftp timeout 36

ftp update

Syntax
ftp update { fast | normal }
undo ftp update
View
System view
Default Level
3: Manage level
Parameters
fast: Fast update.
normal: Normal update.
Description
Use the ftp update command to set the file update mode that the FTP server uses while receiving
data.
Use the undo ftp update command to restore the default, namely, the normal mode.
6-5