Accounting Command - HP E4510-48G Command Reference Manual

View
Local user view
Default Level
3: Manage level
Parameters
max-user-number: Maximum number of user connections using the current username, in the range 1
to 1024.
Description
Use the access-limit command to enable the limit on the number of user connections using the
current username and set the allowed maximum number.
Use the undo access-limit command to remove the limitation.
By default, there is no limit to the number of user connections using the same username.
Note that the access-limit command takes effect only when local accounting is configured.
Related commands: display local-user.
Examples
# Enable the limit on the number of user connections using the username abc and set the allowed
maximum number to 5.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] access-limit 5

accounting command

Syntax
accounting command hwtacacs-scheme hwtacacs-scheme-name
undo accounting command
View
ISP domain view
Default Level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is
a string of 1 to 32 characters.
Description
Use the accounting command command to specify the HWTACACS scheme for command line
users.
Use the undo accounting command command to restore the default.
1-2