Display Rrpp Brief - HP E4510-48G Command Reference Manual

[Sysname-rrpp-domain1] control-vlan 100

display rrpp brief

Syntax
display rrpp brief
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display rrpp brief command to display the brief RRPP information.
Examples
# Display the brief RRPP information.
<Sysname> display rrpp brief
Flags for Node Mode :
M –- Master , T -- Transit , E -- Edge , A -- Assistant-Edge
RRPP Protocol Status: Enable
Number of RRPP Domains: 2
Domain ID : 1
Control VLAN : Major 5
Protected VLAN: Reference Instance 0 to 2, 4
Hello Timer : 1 sec Fail Timer : 3 sec
Ring Ring Node Primary/Common
ID Level Mode Port
--------------------------------------------------------------------------------
1 1 M
Domain ID : 2
Control VLAN : Major 10
Hello Timer : 1 sec Fail Timer : 3 sec
Protected VLAN: Reference Instance 0 to 2, 4
Ring Ring Node Primary/Common
ID Level Mode Port
--------------------------------------------------------------------------------
1 0 T
2 1 E
Sub 6
GigabitEthernet1/0/1
Sub 11
GigabitEthernet1/0/3
GigabitEthernet1/0/3
GigabitEthernet1/0/4
Secondary/Edge
Port
GigabitEthernet1/0/2
Secondary/Edge
Port
GigabitEthernet1/0/4
GigabitEthernet1/0/5
3-2
Enable
Status
Yes
Enable
Status
Yes
Yes