HP E4510-48G Command Reference Manual page 650

Packet unit
------------------------------------------------------------------
Total 1 RADIUS scheme(s)
Table 2-1 display radius scheme command output description
Field
SchemeName
Index
Type
Primary Auth IP/ Port/ State
Primary Acct IP/ Port/ State
Second Auth IP/ Port/ State
Second Acct IP/ Port/ State
Auth Server Encryption Key
Acct Server Encryption Key
Accounting-On packet disable
send times
interval
Interval for timeout(second)
Retransmission times for timeout
Interval for realtime
accounting(minute)
Retransmission times of
realtime-accounting packet
Retransmission times of
stop-accounting packet
Quiet-interval(min)
Username format
Data flow unit
Packet unit
Total 1 RADIUS scheme(s)
: one
Description
Name of the RADIUS scheme
Index number of the RADIUS scheme
Type of the RADIUS server
IP address/access port number/current status of the
primary authentication server: (active or block)
If there is no primary authentication server specified, the
IP address is 0.0.0.0 and the port number is the default.
This rule is also applicable to the following three fields.
IP address/access port number/current status of the
primary accounting server: (active or block)
IP address/access port number/current status of the
secondary authentication server: (active or block)
IP address/access port number/current status of the
secondary accounting server: (active or block)
Shared key of the authentication server
Shared key of the accounting server
The accounting-on function is disabled
Retransmission times of accounting-on packets
Interval to retransmit accounting-on packets
Timeout time in seconds
Times of retransmission in case of timeout
Interval for realtime accounting in minutes
Retransmission times of realtime-accounting packet
Retransmission times of stop-accounting packet
Quiet interval for the primary server
Format of the username
Unit of data flows
Unit of packets
1 RADIUS scheme in total
2-3