Display Saved-Configuration - HP E4510-48G Command Reference Manual

<Sysname> display archive configuration
Location: flash:/archive
Filename prefix: my_archive
Archive interval in minutes: 120
Maximum number of archive files: 10
Saved archive files:
No. TimeStamp
1 Aug 05 2007 20:24:54
2 Aug 05 2007 20:34:54
# 3 Aug 05 2007 20:44:54
'#' indicates the most recent archive file.
Next archive file to be saved: my_archive_4.cfg
Table 5-2 display archive configuration command output description
Field
Location
Archive interval in minutes

display saved-configuration

Syntax
display saved-configuration [ by-linenum ]
View
Any view
Default Level
2: System level
Parameters
by-linenum: Identifies each line of displayed information with a line number.
Description
Use the display saved-configuration command to display the contents of the configuration file saved
for the next startup of the device.
During device management and maintenance, you can use this command to check whether important
configurations are saved to the configuration file to be used for the next startup of the device.
This command displays the main configuration file to be used for the next system startup.
If the system is not specified with a configuration file for the next startup or the specified configuration
file does not exist, no information will be displayed when you execute the display
saved-configuration command.
Related commands: save, reset saved-configuration; display current-configuration in Basic
System Configuration Commands in the System Volume.
FileName
my_archive_1.cfg
my_archive_2.cfg
my_archive_3.cfg
Absolute path of the saved configuration files
Configuration file saving interval, in minutes.
If the automatic saving is disabled, this field is not displayed.
5-21
Description