HP E4510-48G Command Reference Manual page 1283

Parameters
name: Cluster name, a string of 1 to 8 characters, which can only be letters, numbers, subtraction sign
(-), and underline (_).
Description
Use the build command to configure the current device as the management device and specify a
name for it.
Use the undo build command to configure the current management device as a candidate device.
By default, the device is not a management device.
Note that:
When executing this command, you will be asked whether to create a standard topology map or
not.
This command can only be applied to devices that are capable of being a management device
and are not members of other clusters. The command takes no effect if you execute the command
on a device which is already a member of another cluster. If you execute this command on a
management device, you will replace the cluster name with the one you specify.
The member number of the management device is 0.
Examples
# Configure the current device as a management device and specify the cluster name as aabbcc.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] build aabbcc
[Sysname-cluster] ip-pool 172.16.0.1 255.255.255.248
Restore topology from local flash file,for there is no base topology.
(Please confirm in 30 seconds, default No). (Y/N)
Y
Begin get base topology file from local flash......
Get file error, can not finish base topology recover
#Sep 18 19:56:03:804 2006 Sysname IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.4: Interface 3276899 is Up, ifAdminStatus is 1, ifOperSt
atus is 1
#Sep 18 19:56:03:804 2006 Sysname CLST/4/Cluster_Trap:
OID:1.3.6.1.4.1.2011.6.7.1.0.3: member 0.0.0.0.0.224.252.0.29.0 role change, NTD
PIndex:0.0.0.0.0.0.224.252.0.29.0, Role:1
%Sep 18 19:56:03:804 2006 Sysname IFNET/4/UPDOWN:
Line protocol on the interface Vlan-interface100 is UP
[aabbcc_0.Sysname-cluster]
%Sep 18 19:56:18:782 2006 Sysname CLST/4/LOG:
Member 000f-e200-1e00 is joined in cluster aabbcc.
[aabbcc_0.Sysname-cluster]
20-19