HP E4510-48G Command Reference Manual page 1293

Description
Use the display cluster command to display the state and statistics of the cluster to which the current
device belongs.
Note that this command can be executed on the management device and member devices only.
Examples
# Display cluster information on the management device.
<aaa_0.Sysname> display cluster
Cluster name:"aaa"
Role:Administrator
Management-vlan:100
Handshake timer:10 sec
Handshake hold-time:60 sec
IP-Pool:1.1.1.1/16
cluster-mac:0180-c200-000a
No logging host configured
No SNMP host configured
No FTP server configured
No TFTP server configured
2 member(s) in the cluster, and 0 of them down.
# Display cluster information on a member device.
<aaa_1.Sysname> display cluster
Cluster name:"aaa"
Role:Member
Member number:1
Management-vlan:100
cluster-mac:0180-c200-000a
Handshake timer:10 sec
Handshake hold-time:60 sec
Administrator device IP address:1.1.1.1
Administrator device mac address:000f-e200-1d00
Administrator status:Up
Table 20-5 display cluster command output description
Cluster name
Role
Member number
Management-vlan
Handshake timer
Handshake hold-time
Field
Name of the cluster
Role of the switch in the cluster, Administrator means the
current device is a management device and Member means
the current device is a member device.
Member number of the switch in the cluster
Management VLAN of the cluster
Interval to send handshake packets
Value of handshake timer
Description
20-29