HP E4510-48G Command Reference Manual page 719

GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 0, failed: 0
Current online user number is 0
MAC Addr Authenticate state
......(part of the output omitted)
Table 7-1 display mac-authentication command output description
Field
MAC address authentication is enabled
User name format is MAC address, like
xxxxxxxxxxxx
Fixed username:
Fixed password:
Offline detect period
Quiet period
Server response timeout value
the max allowed user number
Current user number amounts to
Current domain: not configured, use default
domain
Silent Mac User info
GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 0, failed: 0
Current online user number
MAC Addr
Authenticate state
Auth Index
Auth Index
Description
Whether MAC authentication is enabled
The username is in the format of an MAC address
without hyphens, like xxxxxxxxxxxx.
If the username format is configured as MCA
address with hyphens, "like xx-xx-xx-xx-xx-xx" will
be displayed.
Fixed username
Password of the fixed username
Setting of the offline detect timer
Setting of the quiet timer
Setting of the server timeout timer
Maximum number of users each slot in the device
supports
Number of online users
Currently used ISP domain
Information about silent MAC addresses
Status of the link on port GigabitEthernet 1/0/1
Whether MAC authentication is enabled on port
GigabitEthernet 1/0/1
MAC authentication statistics, including the number
of successful authentication attempts and that of
unsuccessful authentication attempts
Number of online users on the port
Online user MAC address
User status. Possible values are:
CONNECTING: The user is logging in.
SUCCESS: The
authentication.
FAILURE: The user failed the authentication.
LOGOFF: The user has logged off.
Authenticator Index
7-2
user has passed the