HP E4510-48G Command Reference Manual page 1022

Field
Voltage low
Transceiver info I/O error
Transceiver info checksum error
Transceiver type and port configuration
mismatch
Transceiver type not supported by port
hardware
XENPAK
WIS local fault
Receive optical power fault
PMA/PMD receiver local fault
PCS receive local fault
PHY XS receive local fault
RX power high
RX power low
Laser bias current fault
Laser temperature fault
Laser output power fault
TX fault
PMA/PMD receiver local fault
PCS receive local fault
PHY XS receive local fault
TX bias high
TX bias low
TX power high
TX power low
Temp high
Temp low
Transceiver info I/O error
Transceiver info checksum error
Transceiver type and port configuration
mismatch
Transceiver type not supported by port
hardware
Remarks
Voltage is low.
Transceiver information read and write error
Transceiver information checksum error
Transceiver type does not match port configuration.
Transceiver type is not supported on the port.
WIS (WAN Interface Sublayer) local fault
Receive optical power fault
PMA/PMD (Physical Medium Attachment/Physical
Medium Dependent) receiver local fault
PCS (Physical Coding Sublayer) receiver local fault
PHY XS (PHY Extended Sublayer) receive local fault
RX power is high.
RX power is low.
Laser bias current fault
Laser temperature fault
Laser output power fault
TX fault
PMA/PMD receiver local fault
PCS receive local fault
PHY XS receive local fault
TX bias current is high.
TX bias current is low.
TX power is high.
TX power is low.
Temperature is high.
Temperature is low.
Transceiver information read and write error
Transceiver information checksum error
Transceiver type does not match port configuration.
Transceiver type is not supported on the port.
4-20