Patch Load; Patch Location - HP E4510-48G Command Reference Manual

Installing patches...
Installation completed, and patches will continue to run after reboot.
[Sysname]

patch load

Syntax
patch load slot slot-number
View
System view
Default Level
3: Manage level
Parameters
slot slot-number: Specifies a member device by its member ID. The value range of this argument
varies with the device model and can be displayed through the display irf command.
Description
Use the patch load command to load the patch file on the storage medium.
Before using the command, save the patch files to the root directories of the member devices' storage
media.
Examples
# Load the patch files for the device with member ID being 1.
<Sysname> system-view
[Sysname] patch load slot 1

patch location

Syntax
patch location patch-location
View
System view
Default Level
3: Manage level
Parameters
patch-location: Specifies the patch file location. It is a string consisting of 1 to 64 characters. About the
switch 4510G, the location is "flash:".
Description
Use the patch location command to configure the patch file location.
By default, the patch file location is flash:.
17-5