Display Cfd Linktrace-Reply Auto-Detection - HP E4510-48G Command Reference Manual

Field
Relay Action

display cfd linktrace-reply auto-detection

Syntax
display cfd linktrace-reply auto-detection [ size size-value ]
View
Any view
Default level
2: System level
Parameters
size size-value: Specifies the times of recent auto-detections, ranging from 1 to 100.
Description
Use the display cfd linktrace-reply auto-detection command to display the content of the LTR
messages received as responses to the automatically sent LTMs.
Note that:
These LTR messages are stored in the buffer after you executed the cfd linktrace
auto-detection command.
With the size keyword not specified, this command displays the information of all LTRs stored in
the buffer.
Related commands: cfd linktrace auto-detection.
Examples
# Display the content of the LTRs received as responses to the LTMs sent.
<Sysname> display cfd linktrace-reply auto-detection
Service instance: 1
Target MEP ID: 2005
MAC Address
00E0-FC27-6502
00E0-FC00-6510
00E0-FC52-BAA0
Service instance: 2
Target MEP ID: 2025
Indicates whether the forwarding device found the destination MAC
address in its MAC address table
Found: Indicates that the forwarding device found the destination MAC
address in its MAC address table.
Unknown: Indicates that the forwarding device failed to find the
destination MAC address in its MAC address table.
None: Indicates that it is a MEP that responded to the LTM message. A
MEP does not need to find the destination MAC address.
MEP ID: 1003 Time: 2006/05/22 10:43:57
TTL: 64
TTL Forwarded
63 Yes
62 Yes
61 No
MEP ID: 1023 Time: 2006/05/22 10:44:06
TTL: 64
6-13
Description
Relay Action
Found
Found
None