Escape-Key - HP E4510-48G Command Reference Manual

Example
# Display information about the current web users.
<Sysname> display web users
UserID Name
ab820000 admin
Table 1-3 Description on the fields of the display web users command
Field
UserID
Name
Language
Level
State
LinkCount
LoginTime
LastTime

escape-key

Syntax
escape-key { default | character }
undo escape-key
View
User interface view
Default Level
3: Manage level
Parameters
default: Restores the default escape key combination <Ctrl + C>.
character: Specifies the shortcut key for aborting a task, a single character (or its corresponding ASCII
code value in the range 0 to 127) or a string of 1 to 3 characters.
Description
Use the escape-key command to define a shortcut key for aborting tasks.
Use the undo escape-key command to restore the default shortcut key.
You can use a single character (or its corresponding ASCII code value in the range 0 to 127) or a string
of 1 to 3 characters to define a shortcut key. But in fact, only the first character functions as the shortcut
key. For example, if you enter an ASCII value 113, the system will use its corresponding character <q>
as the shortcut key; if you input the string q@c, the system will use the first letter <q> as the shortcut
key.
Language Level
Chinese Management Enable
ID of a web user
Name of the web user
Login language used by the web user
Level of the web user
State of the web user
Number of tasks that the web user runs
Time when the web user logged in
Last time when the web user accessed the switch
State LinkCount LoginTime LastTime
0
Description
1-10
08:41:50 08:45:59