Display Udp Ipv6 Statistics - HP E4510-48G Command Reference Manual

Field
State

display udp ipv6 statistics

Syntax
display udp ipv6 statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display udp ipv6 statistics command to display the statistics of IPv6 UDP packets.
You can use the reset udp ipv6 statistics command to clear the statistics of all IPv6 UDP packets.
Examples
# Display the statistics information of IPv6 UDP packets.
<Sysname> display udp ipv6 statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
IPv6 TCP connection status, including
Closed
Listening
Syn_Sent
Syn_Rcvd
Established
Close_Wait
Fin_Wait1
Closing
Last_Ack
Fin_Wait2
Time_Wait
12-21
Description