Display Port-Security Mac-Address Block - HP E4510-48G Command Reference Manual

display port-security mac-address block

Syntax
display port-security mac-address block [ interface interface-type interface-number ] [ vlan vlan-id ]
[ count ]
View
Any view
Default Level
2: System level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
vlan vlan-id: Specifies a VLAN by its number, which is in the range 1 to 4094.
count: Displays only the count of the blocked MAC addresses.
Description
Use the display port-security mac-address block command to display information about blocked
MAC addresses.
With no keyword or argument specified, the command displays information about all blocked MAC
addresses.
Related commands: port-security intrusion-mode.
Examples
# Display information about all blocked MAC addresses.
<Sysname> display port-security mac-address block
MAC ADDR
0002-0002-0002
000d-88f8-0577
--- On slot 2, 2 mac address(es) found ---
--- 2 mac address(es) found ---
# Display the count of all blocked MAC addresses.
<Sysname> display port-security mac-address block count
--- On slot 2, 2 mac address(es) found ---
--- 2 mac address(es) found ---
# Display information about all blocked MAC addresses in VLAN 1.
<Sysname> display port-security mac-address block vlan 1
MAC ADDR
0002-0002-0002
000d-88f8-0577
--- On slot 2,2 mac address(es) found ---
--- 2 mac address(es) found ---
From Port
GigabitEthernet1/0/1
GigabitEthernet1/0/1
From Port
GigabitEthernet1/0/1
GigabitEthernet1/0/1
VLAN ID
1
1
VLAN ID
1
1
8-3