Display Ntdp Device-List - HP E4510-48G Command Reference Manual

Table 20-2 display ntdp command output description
Field
NTDP is running
Hops
Timer
disable
Hop Delay
Port Delay
Last collection total time

display ntdp device-list

Syntax
display ntdp device-list [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
verbose: Displays the detailed device information.
Description
Use the display ntdp device-list command to display the device information collected through NTDP.
Note that the information displayed may not be that of the latest device if you do not execute the ntdp
explore command before using this command.
Examples
# Display the device list collected through NTDP.
<Sysname> display ntdp device-list
MAC HOP IP
000f-e200-3133 2
000f-e20f-c415 2
000f-e200-2579 1
000f-e200-1751 0
00e0-fd00-0043 2
000f-e200-3199 3
NTDP is enabled globally on the local device.
Hop count for topology collection
Interval to collect topology information (after the cluster is
created)
Indicates the device is not a management device and unable to
perform periodical topology collection
Delay time for the device to forward topology collection
requests
Delay time for a topology-collection request to be forwarded
through a port
Time cost during the last collection
Device
Switch 4200G
31.31.31.5/24 Switch 4200G
Switch 4200G
31.31.31.1/24 Switch 4200G
Sysname S3528P
Switch 4200G
20-8
Description