Display Cluster Black-List; Display Cluster Candidates - HP E4510-48G Command Reference Manual

display cluster black-list

Syntax
display cluster black-list
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display cluster black-list command to display the current blacklist of a cluster.
Note that this command can be executed on the management device only.
Examples
# View the current blacklist of the cluster.
<aaa_0.Sysname> display cluster black-list
Device ID
000f-e200-0010
Table 20-7 display cluster black-list command output description
Device ID
Access Device ID
Access port

display cluster candidates

Syntax
display cluster candidates [ mac-address mac-address | verbose ]
View
Any view
Default Level
1: Monitor level
Access Device ID
000f-e200-3550
Field
Access port
GigabitEthernet1/0/1
Description
ID of the blacklist device, indicated by its MAC address.
ID of the device connected to the blacklist device,
indicated by its MAC address.
Port connected to the blacklist device.
20-32