Patch Delete - HP E4510-48G Command Reference Manual

View
System view
Default Level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument depend on the patch
file used.
slot slot-number: Specifies a member device by its member ID. The value range of this argument
varies with the device model and can be displayed through the display irf command.
Description
Use the patch deactive command to stop running the specified patch and all the ACTIVE patches
before the specified patch number, and the system will run at the original software version.
All the ACTIVE patches (including the specified patch) turn to DEACTIVE state.
This command is not applicable to the patches in the RUNNING state.
Examples
# Stop running patch 3 and all the ACTIVE patches before patch 3 on the device with member ID being
1.
<Sysname> system-view
[Sysname] patch deactive 3 slot 1

patch delete

Syntax
patch delete patch-number slot slot-number
View
System view
Default Level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument depend on the patch
file used.
slot slot-number: Specifies a member device by its member ID. The value range of this argument
varies with the device model and can be displayed through the display irf command.
Description
Use the patch delete command to delete the specified patch and all the patches before the specified
patch number.
This command only removes the patches from the memory patch area, and it does not delete them
from the storage medium. The patches are in the IDLE state after execution of this command.
17-3