Reset Igmp-Snooping Group - HP E4510-48G Command Reference Manual

Default Level
2: System level
Parameters
None
Description
Use the report-aggregation command to enable IGMP report suppression.
Use the undo report-aggregation command to disable IGMP report suppression.
By default, IGMP report suppression is enabled.
This command works on IGMP Snooping–enabled VLANs.
Examples
# Disable IGMP report suppression.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] undo report-aggregation

reset igmp-snooping group

Syntax
reset igmp-snooping group { group-address | all } [ vlan vlan-id ]
View
User view
Default Level
2: System level
Parameters
group-address: Clears the information about the specified multicast group. The value range of
group-address is 224.0.1.0 to 239.255.255.255.
all: Clears all IGMP Snooping multicast group information.
vlan vlan-id: Clears the IGMP Snooping multicast group information in the specified VLAN. The
effective range of vlan-id is 1 to 4094.
Description
Use the reset igmp-snooping group command to clear IGMP Snooping multicast group information.
Note that:
This command works on IGMP Snooping–enabled VLANs.
This command cannot clear IGMP Snooping multicast group information of static joins.
Examples
# Clear all IGMP Snooping multicast group information.
<Sysname> reset igmp-snooping group all
1-24