Qos Vlan-Policy; Reset Qos Policy Global - HP E4510-48G Command Reference Manual

qos vlan-policy

Syntax
qos vlan-policy policy-name vlan vlan-id-list inbound
undo qos vlan-policy vlan vlan-id-list inbound
View
System view
Default Level
2: System Level
Parameters
policy-name: Policy name, a case-sensitive string of 1 to 31 characters. No spaces are allowed in a
policy name.
vlan-id-list: List of VLAN IDs, presented in the form of vlan-id to vlan-id or discontinuous VLAN IDs. Up
to eight VLAN IDs can be specified at a time.
inbound: Specifies to apply the VLAN policy in the inbound direction of the VLAN.
Description
Use the qos vlan-policy command to apply the VLAN policy to the specific VLAN(s).
Use the undo qos vlan-policy command to remove the VLAN policy from the specific VLAN(s).
Do not apply policies to a VLAN and the ports in the VLAN at the same time.
Examples
# Apply the VLAN policy named test in the inbound direction of VLAN 200, VLAN 300, VLAN 400,
VLAN 500, VLAN 600, VLAN 700, VLAN 800, and VLAN 900.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 600 700 800 900 inbound

reset qos policy global

Syntax
reset qos policy global [ inbound ]
View
User view
Default Level
1: Monitor level
1-23