Display Cfd Service-Instance - HP E4510-48G Command Reference Manual

Examples
# Display the information of remote MEP 10 in service instance 4.
<Sysname> display cfd remote-mep service-instance 4 mep 10
MEP ID MAC Address
20 00E0-FC00-6565
30 00E0-FC27-6502
40 00E0-FC00-6510
50 00E0-FC52-BAA0
60 0010-FC00-6502
Table 6-11 display cfd remote-mep command output description
Field
MEP ID
MAC Address
State
Time
MAC Status

display cfd service-instance

Syntax
display cfd service-instance [ instance-id ]
View
Any view
Default level
2: System level
Parameters
instance-id: Service instance, ranging from 1 to 32767.
Description
Use the display cfd service-instance command to display the configuration information of service
instance.
Without specifying the service instance ID, the command will display the configuration information of all
service instances. With service instance ID specified, this command will display the configuration
information of the specified service instance.
Examples
# Display the service instance configuration information.
<Sysname> display cfd service-instance
2 service instance(s) configured:
State Time
OK 2006/03/06 02:36:38
OK 2006/03/06 02:36:38
FAILED 2006/03/06 02:36:39
OK 2006/03/06 02:36:44
OK 2006/03/06 02:36:42
ID of the remote MED
MAC address of the remote MEP device
Running state of MEP, either OK or FAILED
Recent time of the remote MEP when it is FAILED or OK.
State of the port indicated by the last CCM received from the remote
MEP, either UP or DOWN
6-21
MAC Status
UP
DOWN
DOWN
DOWN
DOWN
Description