17
Hotfix Configuration Commands
Hotfix Configuration Commands
display patch information
Syntax
display patch information
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display patch information command to display the hotfix information.
Examples
# Display hotfix information.
<Sysname> display patch information
The location of patches: flash:/
Slot Version
----------------------------------------------------------------------
1
XXX002
2
XXX
Table 17-1 display patch information command output description
Field
The location of patches
Slot
Version
Temporary
Common
Temporaty Common Current Active Running Start-Address
0
1
1
0
0
0
Patch file location. You can configure it using the patch location
command.
Member ID
Patch version. The first three characters represent the suffix of the
PATCH-FLAG. For example, if the PATCH-FLAG of the a device is
PATCH-RPE, "RPE" is displayed. The following three digits, if any,
represent the patch number. (The patch number can be read after
the patch is loaded.)
Number of temporary patches
Number of common patches
0
0
0x4accf74
0
0
0x4accf74
Description
17-1