Reset Igmp-Snooping Statistics; Router-Aging-Time (Igmp-Snooping View) - HP E4510-48G Command Reference Manual

reset igmp-snooping statistics

Syntax
reset igmp-snooping statistics
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset igmp-snooping statistics command to clear the statistics information of IGMP
messages learned by IGMP Snooping.
Examples
# Clear the statistics information of all kinds of IGMP messages learned by IGMP Snooping.
<Sysname> reset igmp-snooping statistics

router-aging-time (IGMP-Snooping view)

Syntax
router-aging-time interval
undo router-aging-time
View
IGMP-Snooping view
Default Level
2: System level
Parameters
interval: Dynamic router port aging time, in seconds. The effective range is 1 to 1,000.
Description
Use the router-aging-time command to configure the aging time of dynamic router ports globally.
Use the undo router-aging-time command to restore the default setting.
By default, the aging time of dynamic router ports is 105 seconds.
This command works on IGMP Snooping–enabled VLANs.
Related commands: igmp-snooping router-aging-time.
Examples
# Set the aging time of dynamic router ports globally to 100 seconds.
1-25