Display Ripng Database - HP E4510-48G Command Reference Manual

Description
Use the display ripng command to display the running status and configuration information of a
RIPng process. If process-id is not specified, information of all RIPng processes will be displayed.
Examples
# Display the running status and configuration information of all configured RIPng processes.
<Sysname> display ripng
RIPng process : 1
Preference : 100
Checkzero : Enabled
Default Cost : 0
Maximum number of balanced paths : 1
Update time
Suppress time : 120 sec(s) Garbage-Collect time : 120 sec(s)
Number of periodic updates sent : 0
Number of trigger updates sent : 0
Table 5-1 display ripng command output description
RIPng process
Preference
Checkzero
Default Cost
Maximum number of balanced paths
Update time
Timeout time
Suppress time
Garbage-Collect time
Number of periodic updates sent
Number of trigger updates sent

display ripng database

Syntax
display ripng process-id database
View
Any view
Default Level
1: Monitor level
: 30 sec(s) Timeout time
Field
: 180 sec(s)
RIPng process ID
RIPng route priority
Indicates whether zero field check for RIPng
packet headers is enabled
Default metric of redistributed routes
Maximum number of load balanced routes
RIPng update interval, in seconds
RIPng timeout interval, in seconds
RIPng suppress interval, in seconds
RIPng garbage collection interval, in seconds
Number of periodic updates sent
Number of triggered updates sent
5-3
Description