Restore Startup-Configuration - HP E4510-48G Command Reference Manual

4510g series
Table of Contents

Advertisement

system will not delete the configuration file but only set the corresponding startup configuration file
(main or backup, according to which one you specified in the command) to NULL.
The execution of the reset saved-configuration command and that of the reset
saved-configuration main command have the same effect, that is, they will delete the main
startup configuration file.
Related commands: save, display saved-configuration.
Examples
# Delete the startup configuration file for the next startup from the storage medium of the device.
<Sysname> reset saved-configuration backup
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 2:
Erase next configuration file successfully

restore startup-configuration

Syntax
restore startup-configuration from src-addr src-filename
View
User view
Default Level
2: System level
Parameters
src-addr: IP address or name of a TFTP server. The address cannot be an IPv6 address.
src-filename: Filename of the configuration file to be downloaded from the specified server.
Description
Use the restore startup-configuration command to download a configuration file from the specified
TFTP server to the device and specify the configuration file as the startup configuration file to be used
at the next startup of the device.
The file downloaded is set as the main startup configuration file to be used at the next system
startup.
This command downloads the configuration file to the root directory of the storage medium of all
the member devices and specifies the file as the startup configuration file to be used at the next
startup of all the member devices.
If the file to be downloaded has the same filename as an existing file on a member device, you will be
prompted whether you want to overwrite the existing file or not. In addition, both the master and the
slaves are assumed to use the storage media of the same type when the device is checking the
5-25

Advertisement

Table of Contents
loading

Table of Contents